PROFIBUS is one of the largest open industrial fieldbus in the world. The network can support up to 32 nodes or run at speeds as high as 12 Mbps. As with most fieldbus systems, PROFIBUS can reduce operation costs, increase productivity, decrease time-to-market for new products, and improve product quality. Unlike to standard 4-20mA control, PROFIBUS can support 32 stations on a single bus segment operating on one twisted pair cable.
The bus topology is a linear bus a shielded twisted pair cable. The network can support up to 127 nodes with the use of repeaters. The max. line length is 4800m using repeaters, or 1200m without repeaters. The number of repeaters that can be used is limited to four. Standard connections are made trough the use of a 9-Pin D-Sub connector. Transmission speeds are selectable starting at 9.6 Kbps.
- Yellow(RAL 1023), black(RAL9005) or red(RAL 3002) TPE sheath.
Application
The AS-Interface shaped cable is intended for use with AS-Interface networks.
The flexible, yellow AS-Interface cable provides standard cabling of all AS-Interface stations. Both the data end power supply are carried on this cable.
The black AS-Interface power cable us used for the supply of additional external power for the outputs(24VDC).
The AS-Interface shaped cable is available in red for modules operating with a 230 VAC power supply.
- Insulation cellular PE for data, nylon coated PVC for power,
Colour codes power pair; red, black data pair; blue, white.
- Individually aluminium foil shielded of twisted pairs.
- Tinned copper drain wire.
- Plastic laminated aluminum foil shield.
- Grey PVC(RAL 7001) sheath.
Honeywell SDS Features
The Smart Distiributed System is a bus system that streamlines the installation process by utilizing interoperation of intelligent inputs and outputs. The basic benefits are enhanced diagnostics, robust signal transmission, improved device response time, and overall improved communication between devices. The Smart Distributed System is completely open, modular, and compatible with standard networks, I/O, and many controllers.
The network can support up to 126 individually adressable devices on a single 4-wire cable.
The emek cable for SDS is a two pair cable containing a data and power pair under the same overall rugged jacket. Each pair is shielded with a common overall drain wire for maximum signal integrity in noisy industrial environments The cables are designed according to the Smart Distributed System physical layer specification for conformance and compatibility.
- Insulation cellular PE for data, nylon coated PVC for power,
Colour codes power pair; red, black data pair; blue, white.
- Individually aluminium foil shielded of twisted pairs.
- Tinned copper drain wire.
- Tinned copper braid shield.
- Coverage min.%65.
- Grey PVC(RAL 7001) sheath.
DeviceNet Features
DeviceNet is a low-cost communications link to connect industrial devices to a network with out the expense of hardwiring and traditional "homerun" cabling practices. He basic benefits are increased device-level diagnostics, direct connectivity and overall improved communication. DeviceNet is an open network standard that addresses all kinds of field devices. It allows interchangeability of simple devices and total direct connectivity of larger, more complex communication links.
The network can support up to 64 nodes and the network end-to-end distance is variable based on the network speed. At 125 Kbps, the max. network distance is 500 m. At the highest speed, 500 Kbps, the max. network distance is 100 m.
The emek cable for DeviceNet is a two pair cable containing a data and power pair under the same overall rugged jacket. Each pair is shielded with a common overall drain wire for maximum signal integrity in noisy industrial environments The cables are designed according to the DeviceNet physical layer specification for conformance and compatibility.
The bus topology is a linear bus a shielded twisted pair cable. The network can support up to 127 nodes with the use of repeaters. The max. line length is 4800m using repeaters, or 1200m without repeaters. The number of repeaters that can be used is limited to four. Standard connections are made trough the use of a 9-Pin D-Sub connector. Transmission speeds are selectable starting at 9.6 Kbps.
PROFIBUS is one of the largest open industrial fieldbus in the world. The network can support up to 32 nodes or run at speeds as high as 12 Mbps. As with most fieldbus systems, PROFIBUS can reduce operation costs, increase productivity, decrease time-to-market for new products, and improve product quality. Unlike to standard 4-20mA control, PROFIBUS can support 32 stations on a single bus segment operating on one twisted pair cable.
The bus topology is a linear bus a shielded twisted pair cable. The network can support up to 127 nodes with the use of repeaters. The max. line length is 4800m using repeaters, or 1200m without repeaters. The number of repeaters that can be used is limited to four. Standard connections are made trough the use of a 9-Pin D-Sub connector. Transmission speeds are selectable starting at 9.6 Kbps.
PROFIBUS is one of the largest open industrial fieldbus in the world. The network can support up to 32 nodes or run at speeds as high as 12 Mbps. As with most fieldbus systems, PROFIBUS can reduce operation costs, increase productivity, decrease time-to-market for new products, and improve product quality. Unlike to standard 4-20mA control, PROFIBUS can support 32 stations on a single bus segment operating on one twisted pair cable.
The bus topology is a linear bus a shielded twisted pair cable. The network can support up to 127 nodes with the use of repeaters. The max. line length is 4800m using repeaters, or 1200m without repeaters. The number of repeaters that can be used is limited to four. Standard connections are made trough the use of a 9-Pin D-Sub connector. Transmission speeds are selectable starting at 9.6 Kbps.
Profibus
